Statistical Process Control (SPC)

Statistical process control (SPC) is a method for achieving quality control in manufacturing processes. It is a set of methods using statistical tools such as mean, variance and others, to detect whether the process observed is under control.

Statistical process control was pioneered by Walter A. Shewhart and taken up by W. Edwards Deming with significant effect by the Americans during the World War II to improve aircraft production. Deming was also instrumental in introducing SPC techniques into Japanese industry after that war. Classical Quality Control was achieved by observing important properties of the finished product and accept/reject the finished product. As oposed to this statistical process control uses statistical tools to observe the performance of the production line to predict significant deviations that may result in reject products. The underlying assumption in the SPC method is that any production process will produce products whose properties vary slightly from their designed values, even when the production line is running normally, and these variences can be analyzed statistically to control the process. For example, a breakfast cereal packaging line may be designed to fill each cereal box with 500 grams of product, but some boxes will have slightly more than 500 grams, and some will have slightly less, producing a

Statistical Process Control by Leonard Doty   SPC Simplified by Robert   SPC PowerPoint Presentation Quality Series PowerPoint Presentations Quality Toolkit Factory Toolbox SPC Resource Center Evolving Excellence Blog Events Calendar

distribution of net weights. If the production process itself changes (for example, the machines doing the manufacture begin to wear) this distribution can shift or spread out. For example, as its cams and pulleys wear out, the cereal filling machine may start putting more cereal into each box than it was designed to. If this change is allowed to continue unchecked, product may be produced that fall outside the tolerances of the manufacturer or consumer, causing product to be rejected.

By using statistical tools, the operator of the production line can discover that a significant change has been made to the production line, by wear and tear or other means, and correct the problem - or even stop production - before producing product outside specifications. An example of such a statistical tool would be the shewart control chart, and the operator in the aformentioned example plotting the net weight in the shewart chart.